Factory source Serrated Steel Bar - P10 40mm Heavy Duty Galvanized Steel Grating – Chengsen
Factory source Serrated Steel Bar - P10 40mm Heavy Duty Galvanized Steel Grating – Chengsen Detail:
Description
Heavy duty steel grating supplies far greater strength-to-weight ratio than other flooring materials to bear the heavy load such as forklift or truck traffic.
Because these gratings are typically in more severe service, it is highly recommended that all open ends be trim or load banded. The welded band bar helps distribute these loads and minimizes potential panel distortion.
The Characteristics Of Heavy Type Steel Plate Grating
The biggest characteristic of heavy steel plate is that it has a large load capacity and the strongest impact resistance. It is recommended to use toothed steel lattice plate, which can provide better friction. It is the preferred product for places with large loads and many vehicles. Pressing lock is the best manufacturing method, which can effectively prevent the tilt instability of bearing flat steel. Avoid load flat steel deformation.
Heavy Type Steel Lattice Plate Grating Requirements
The production technology of heavy steel plate has special requirements. Generally, high quality carbon structural steel or stainless steel is required to have high strength and good corrosion resistance. Its chemical composition and mechanical properties shall comply with the requirements of Q235A of GB70088 or 0Crl8Ni9 of GBl22092, respectively. Each bearing flat steel and rimmed flat steel are double breaded fillet welding and the weld is not less than 3MM; The joint of each bearing flat steel and twist rod is fully welded; After the production of semi-finished black parts, the spatter, welding slag and burr must be removed, the corners without sharp edges must be polished, and the whole plate must be flat. The heavy steel plate is also very strict for galvanizing. When the thickness of bearing flat steel is not less than 5MM, the average weight of zinc layer after galvanizing shall not be less than 610g/㎡; When the thickness of the bearing flat steel is less than 5mm, the average weight of zinc layer after galvanizing shall not be less than 460g/㎡. The quality and requirements after galvanizing should conform to the latest “hot dip Galvanizing” GB/T13912-2008 standard.
Heavy Type Steel Grating
|
Type |
bearing |
bearing |
Cross |
Theory |
Loadand |
Clear span |
||||||||||||||
|
200 |
400 |
600 |
800 |
1000 |
1200 |
1400 |
1600 |
1800 |
2000 |
2200 |
2400 |
2600 |
2800 |
3000 |
||||||
|
G1508/40/100 |
150 |
8 |
8×8 |
284.9 |
U |
25500 |
6375 |
2833 |
1593 |
1020 |
708 |
520 |
398 |
314 |
255 |
210 |
177 |
150 |
130 |
113 |
|
D |
0.05 |
0.18 |
0.41 |
0.73 |
1.15 |
1.66 |
2.26 |
2.95 |
3.74 |
4.63 |
5.6 |
6.7 |
7.85 |
9.17 |
10.54 |
|||||
|
G1308/40/100 |
130 |
8 |
8×8 |
247.6 |
U |
19153 |
4788 |
2128 |
1197 |
766 |
532 |
390 |
299 |
236 |
191 |
158 |
133 |
113 |
97 |
85 |
|
D |
0.05 |
0.21 |
0.48 |
0.85 |
1.33 |
1.91 |
2.6 |
3.14 |
4.32 |
5.34 |
6.49 |
7.76 |
9.11 |
10.55 |
12.22 |
|||||
|
G1208/40/100 |
120 |
8 |
8×8 |
229.0 |
U |
16320 |
4080 |
1813 |
1020 |
653 |
453 |
333 |
255 |
201 |
163 |
134 |
113 |
96 |
83 |
72 |
|
D |
0.06 |
0.23 |
0.52 |
0.92 |
1.44 |
2.07 |
2.83 |
3.7 |
4.68 |
5.8 |
7 |
8.39 |
9.85 |
11.5 |
13.2 |
|||||
|
G1008/40/100 |
100 |
8 |
8×8 |
191.7 |
U |
11333 |
2833 |
1259 |
708 |
453 |
314 |
231 |
177 |
139 |
113 |
93 |
78 |
67 |
57 |
50 |
|
D |
0.07 |
0.28 |
0.62 |
1.1 |
1.73 |
2.48 |
3.39 |
4.45 |
5.61 |
6.97 |
8.43 |
10.05 |
11.94 |
13.73 |
15.94 |
|||||
|
G908/40/100 |
90 |
8 |
8×8 |
173.1 |
U |
9180 |
2295 |
1020 |
573 |
367 |
255 |
187 |
143 |
113 |
91 |
75 |
63 |
54 |
46 |
40 |
|
D |
0.08 |
0.31 |
0.69 |
1.22 |
1.92 |
2.77 |
3.77 |
4.93 |
6.26 |
7.72 |
9.35 |
11.17 |
13.24 |
15.25 |
17.57 |
|||||
|
G808/40/100 |
80 |
8 |
8×8 |
154.4 |
U |
7253 |
1813 |
805 |
453 |
290 |
201 |
148 |
113 |
89 |
72 |
59 |
50 |
42 |
37 |
32 |
|
D |
0.09 |
0.34 |
0.77 |
1.38 |
2.16 |
3.11 |
4.25 |
5.56 |
7.04 |
8.71 |
10.5 |
12.66 |
14.73 |
17.53 |
20.11 |
|||||
|
G758/40/100 |
75 |
8 |
8×8 |
145.1 |
U |
6375 |
1593 |
708 |
398 |
255 |
177 |
130 |
99 |
78 |
63 |
52 |
44 |
37 |
32 |
28 |
|
D |
0.09 |
0.37 |
0.83 |
1.47 |
2.31 |
3.33 |
4.54 |
5.92 |
7.5 |
9.27 |
11.25 |
13.55 |
15.78 |
18.47 |
21.42 |
|||||
|
G756/30/100 |
75 |
6 |
8×8 |
140.1 |
U |
6375 |
1593 |
708 |
398 |
255 |
177 |
130 |
99 |
78 |
63 |
52 |
44 |
37 |
32 |
28 |
|
D |
0.09 |
0.37 |
0.83 |
1.47 |
2.3 |
3.33 |
4.54 |
5.91 |
7.49 |
9.26 |
11.24 |
13.53 |
15.76 |
18.44 |
21.39 |
|||||
|
G756/40/100 |
75 |
6 |
8×8 |
110.1 |
U |
4781 |
1195 |
531 |
298 |
191 |
132 |
97 |
74 |
59 |
47 |
39 |
33 |
28 |
24 |
21 |
|
D |
0.09 |
0.37 |
0.83 |
1.47 |
2.3 |
3.31 |
4.52 |
5.9 |
7.56 |
9.22 |
11.25 |
13.55 |
15.93 |
18.48 |
21.44 |
|||||
|
G706/30/100 |
70 |
6 |
8×8 |
131.1 |
U |
5553 |
1388 |
617 |
347 |
222 |
154 |
113 |
86 |
68 |
55 |
45 |
38 |
32 |
28 |
24 |
|
D |
0.1 |
0.39 |
0.89 |
1.58 |
2.47 |
3.56 |
4.85 |
6.32 |
8.04 |
9.96 |
11.99 |
14.41 |
16.82 |
19.9 |
22.65 |
|||||
|
G706/40/100 |
70 |
6 |
8×8 |
103.2 |
U |
4165 |
1041 |
462 |
260 |
166 |
115 |
85 |
65 |
51 |
41 |
34 |
28 |
24 |
21 |
18 |
|
D |
0.1 |
0.39 |
0.88 |
1.58 |
2.46 |
3.55 |
4.87 |
6.38 |
8.05 |
9.91 |
12.09 |
14.19 |
16.85 |
19.95 |
22.7 |
|||||
Notes:
1. U: safe and uniformly distributed load, KN/m2.
2. D: the maximum deflection corresponding to the listed safe load.
3. Theoretical weight is the weight of 1m length of hot dipped galvanized grating.
Product detail pictures:
Related Product Guide:
We insist on offering premium quality creation with very good company concept, honest product sales along with the finest and fast assistance. it will bring you not only the premium quality item and huge profit, but the most significant is to occupy the endless market for Factory source Serrated Steel Bar - P10 40mm Heavy Duty Galvanized Steel Grating – Chengsen , The product will supply to all over the world, such as: United States, America, Argentina, Our market share of our products has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future. We are looking forward to your inquiry and order.
By Sahid Ruvalcaba from Istanbul - 2017.05.21 12:31
The supplier abide the theory of quality the basic, trust the first and management the advanced so that they can ensure a reliable product quality and stable customers.
By Antonia from Guinea - 2018.10.09 19:07